carpet cement::But take a deep breath because you can make the repair yourself and save the expense of a service call and overpriced professional repair carpet cement

carpet cement::But take a deep breath because you can make the repair yourself and save the expense of a service call and overpriced professional repair.
It is relatively easy to repair damaged carpet and it can be done so that the repair is practically invisible.
While this is not the best situation, it is still better than having an obvious burn or stain in full view.
Before cutting a piece of carpet out of a closet to make your repair, measure the stained or burned carpet that you will need to replace and cut a section large enough to patch the stained area.
You may wish to steam clean the carpet in the heavily trafficked area first so that the unused original carpet will be a better match.
In addition to the piece of carpet, you will need a sharp utility knife, sharp scissors, carpet cement and a finetip black marker.
If your repair requires replacing a large piece of carpeting, you will also need carpet repair tape.
Carpet cement and repair tape can be found in the carpet department of a home improvement store or at a carpet store.
Being very careful not to cut all the way through to the padding, cut out the stained or burned carpet with a utility knife and pull it up.
Trace around the perimeter of the stained piece on the backside of your carpet patch with the finetip marker.
Following the outline use the utility knife to cut out a new piece of carpet that will replace the stained piece.
Since you matched the size and shape exactly, the patch should fit the hole perfectly, just like a jigsaw puzzle.
Now apply your carpet cement to the back of the replacement piece and firmly press it into place.
Let the cement dry completely and then brush the edges of the nap with your hand to blend it in with the surrounding carpet.
If there are any stray fibers, trim them away with a scissors.
You can repair larger stains or burns in the same fashion.
Remove the damaged area and, matching the nap, cut a piece of clean carpet patching to fill in the removed section.
With larger pieces of carpet, however, you will need to use doublesided carpet tape to secure the patch to the padding below.
Apply strips of tape to the padding along the edges of the cut away section, and also apply tape to the center of the new piece of carpeting.
Use carpet cement around the edges of the carpet patch for a seamless finish.
Once the piece of carpet is in place, set a heavy object on top the repair for at least eight hours.
After removing the object, blend in the edges with your hand and cut away fibers as needed.
Looking for more contemporary decorating ideas?
Alyssa davis is the onstaff writer for metalwallart.
Com and offers many more affordable ways to decorate the home with and.
carpet cement::Shelves are made from durable 20 gauge steel carpet
cement